United States Department of Agriculture
Natural Resources Conservation Service		 Ohio Go to Accessibility Information
Skip to Page Content





Area 2 CADD Software (NRCS)

The following table provides information about the types of CADD software in use in Area 2 by the NRCS.  Contact persons are also shown.

LEGEND
(EP) designates the Eagle Point software.
(LDD) designates the Autodesk Land Desktop software.
(Map) designates the Autodesk Map 3D software.
(LIC) designates the LI Contour software.
(N) designates the software is a Network version.

Area 2
County Contact Person    Drawing Software Design Software Owner
Ashland Dale Barr Civil 3D/LDD 2007 (N) Civil 3D/LDD 2007 (N) NRCS
Ashtabula Troy Smith Civil 3D/LDD 2007 (N) Civil 3D/LDD 2007 (N) NRCS
Columbiana Drue Kovick Civil 3D/LDD 2007 (N) Civil 3D/LDD 2007 (N) NRCS
Medina Jon Kreglow
Jim Maple
Greg Wells		 Civil 3D/LDD 2007 (N)
Civil 3D/LDD 2007 (N)
Civil 3D/LDD 2007 (N)		 Civil 3D/LDD 2007 (N)
Civil 3D/LDD 2007 (N)
Civil 3D/LDD 2007 (N)		 NRCS
NRCS
NRCS
Portage John Ruggieri Civil 3D/LDD 2007 (N) Civil 3D/LDD 2007 (N) NRCS
Richland Ken Kamenik Map 2007 (N) None NRCS
Wayne Jeff LeFever Civil 3D/LDD 2007 (N) Civil 3D/LDD 2007 (N) NRCS

Area 1 CADD | Area 2 CADD | Area 3 CADD | Area 4 CADD | Area 5 CADD | State Office CADD |

< Back to CADD Station Locations in Ohio