CADD Resources

• Blank Drafting Paper Forms
• Standard Border and Title Block Sheets
• The "CADalog"
  "A Collection of Standard Drawings and Details in CAD Format"
  • CADalog Pages (other than details/drawings)
  • Standard DETAILS
  • Standard DRAWINGS
• CADD Station Locations and Contact Persons for Ohio NRCS 
• Other NRCS CADD Web Pages
  • Iowa  |  Illinois  |  Indiana  |  Minnesota  |  Missouri  |  Wisconsin
• Eagle Point Users
  • General Information 
• NRCS-Eagle Point Client Support Web Page (link to Eagle Point web site)
  Scroll down the table to the NRCS section.
• NRCS-Wisconsin Standard Wall Drawings
  (Link to the NRCS-WISCONSIN web site for "Waste Storage" drawings).

NOTE:
The Wisconsin Standard Wall Drawings are to be used "As-Is" except that floor slabs shall meet the slab requirements as stated in the Ohio Construction Specification "Concrete". The "Conditions of Use" are shown on each drawing. Some designs and details were made assuming Grade 40 steel would be used. Grade 60 steel may be used as a substitute with no other changes needed to the drawings.

This document requires Adobe Acrobat.

Computer Aided Design (CAD) Standards (PDF; 2.6 Mb)
 You will be redirected to the NRCS eDirectives web site.
 Select:  Handbooks- Title 210 Engineering- National Engineering Handbook
 (NEH)- Part 641 "Drafting and Drawings"